Mr Potlight Logo

Potlights Bring Your Home to Life

How to Layout Recessed Lighting

Recessed lighting layout can be a tricky task. This is because improperly installed recessed lighting systems can create uneven illumination, unwanted shadows, and reduce the value of your property. So it is critical to understand exactly how to layout your pot light and space them correctly to avoid unwanted results.

Recessed Lighting Layout Process

There are many factors to consider before you even begin your recessed light layout. Planning your pot lighting installation with these effective tips will ensure your fixtures are installed properly and evenly throughout the room.

  • Step 1: Determine the Purpose of Your Recessed Lights

When planning your pot light installation, it is important to know why and where you are adding the light fixtures. Unlike traditional lighting installed in the centre of the ceiling, recessed lighting layouts are designed to illuminate the entire room evenly and minimise shadows. Therefore, to ensure your lighting does the job you want it to do, you need to decide what room you will be installing the recessed fixtures in. If there is a specific area you want to add light to, you need to mind this in your layout placement plan.

Recessed Lighting layout

  • Step 2: Create a Blueprint

Before you even begin to install your pot lights, you need to have a plan. Start by drawing blueprints on paper to measure your lighting placement and spacing. Your blueprints should recognise your room’s dimensions, appliances, furnishings, walls, entryways, and other features that could affect how and where you place the lights.

  • Step 3: Decide What Type of Lighting You Want

Recessed lighting comes in different types, styles, functions, and sizes. To create the perfect balance of beauty and illumination in your lighting plan, determine what type of lighting you want for your room. Bigger recessed light fixtures are better suited to higher ceilings because they give off more light. Smaller lighting units, however, work better on lower ceilings.

  • Step 4: Calculate the Wattage

Before you hang your lights, you will also need to know how much wattage your outlets can handle. The standard way to calculate lighting wattage for your room is to use the formula: Length x Width x 1.5 = Wattage.

  • Step 5: Understand the Dimensions to Calculate Spacing

One of the more important considerations when planning your lighting placement is the size of your room. What is the total length and width of your room? These measurements are vital when calculating your light spacing and distance from your walls. For example, if you want to create a more ambient illumination in your room, you will need to divide the total length of your room by the number of lights you want to install. These measurements are vital in your calculations for recessed light placement.

Recessed Lighting Layout Recommendations

exterior pot lights

Installing recessed lights is a great way to upgrade your fixtures while increasing the brightness of your room. Before installation begins, you need to plan your layout. Understanding your lighting system along with simple calculations will help you with your recessed light placement.

If you have any questions about recessed lighting layout, reach out to a professional electrician. This way, you avoid the trouble of improper pot light installation as well as potential damage.

Mr. Potlight Advantage

  1. All our electricians are licensed
  2. We are fully insured
  3. You will receive an ESA Certificate after installation *
  4. Absolutely No Mess or Damage to your home guaranteed
  5. You pay upon the completion of your pot light installation
  1. No Molding required – We do not run wires through Moldings
  2. No Damage to Ceilings
  3. No ripping of carpets or drywalls
  4. No overloading of Circuits
  5. No use sub-par pot lights

ESA Certification

*To receive an ESA Certification please verify with the electrician when consulting.



  • We guarantee that your pot light installation will be completed in one day!
  • We install over 100 pot lights in a day with Absolutely No Mess or Damage to your home.
  • We provide a 5-year Warranty on our products.
  • Our policy reflects the following statement: you don’t have to pay until your pot light installation is complete and up to par, because we hold our promise to the highest degree of integrity.

Email Our Staff

Request a call back from our lighting specialists.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Request Call Back

Would you like us to call you back?

All we need is your name, phone number, and the best time to call. Please fill in the form below and thank you for choosing Mr. Potlight™.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.